Products are widely used in a variety of lathes, grinding machines, machine tools, spraying equipment, CNC machine tools, machining centers, measuring instruments, precision testers, electronics, automation machinery, textile machinery, automotive, food machinery, medical equipment, printing machinery, packaging machinery, woodworking machinery and many other fields. German INA rolling bearings and linear guides, with their special design and reliable quality, play a key role in power transmission equipment and all kinds of machine tools around the world. INA linear guide system, including linear guide, linear sleeve, linear optical shaft, ball spline, sliding unit, etc. Various product models: INA-KWVES, KWVESN, KWVEH, TKVD KWVE15S, KWVE20S, KWVE25S, KWVE30S, KWVE35S, KWVE45S, KWVE20SN, KWVE25SN, KWVE30SN, KWVE35SN, KWVE45SN, KWVE25H, KWVE30H, KWVE35H, KWVE45H, KUVE15S, KUVE20S, KUVE25S, KUVE30S, KUVE35S, KUVE20SN, KUVE25SN, KUVE30SN, KUVE35SN, KUVE45SN, KUVE25H, KUVE30H, KUVE35H, KUVE45H, TKVD15, TKVD20, TKVD25, TKVD30, TKVD35, TKVD45

Interchangeability:

A linear cycle roller bearing guide system has a slider and guide that match each other as a system because its preload tolerances requirements are very similar. After consultation, it is also possible to use different combinations of guide rails and sliders. Cylindrical rollers arranged with contact Angle X can withstand tension, pressure and lateral loads. 

Corrosion resistant design:

Linear cycle roller bearing guide system RUE... -E can also be Corrotect plating. If the slide and guide are ordered separately, then the following will be followed: 

Slide and guide corrosion protection - suffix RRF. 

If supplied as a system: Slide with guide corrosion protection - suffix RRF. 

Guide Rail corrosion protection only - suffix RRFT. 

Leakproofness:

Slide is completely closed from all directions by baffle, clearance seal, upper seal and lower double side seal. These seals ensure that the rolling element is not contaminated even in harsh environments. Double lip seals at both ends of the standard sliders ensure that no lubricating oil or grease is lost from the system. 

Preloaded: 

When the preload is only a very small deviation, the system will achieve optimal rigidity. When the linear cycle roller bearing guide system leaves the factory, it has been assembled in complete sets, and each part has been grouped and matched. 

Impact of preload on linear guidance system: The higher the preload, the better the rigidity. However, preload affects friction and the life of the system. 

Friction:

The coefficient of friction depends on the C/P ratio. For unsealed load ratios between C/P=4 and C/P=20: ␮RUE=0.002 to 0.004. 

Accuracy:

The accuracy level of linear circular roller bearing guide system ranges from G0 to G3

1) Width range of cutting linear guide rail: 12mm to 75mm. 

2) Linear guide cutting machine motor parameters: three-phase asynchronous motor; Power: 5. 5KW; Speed: 2800r/min. 

3) Working speed of the grinding wheel: 3200r/min. 

4) Grinding wheel used for cutting machine: the width of linear guide rail is 30mm and below the grinding wheel model: external diameter 300mmX thickness 1.5mmX inner diameter 32mm; Type of grinding wheel for linear guide rails with a width of 35mm or more: outer diameter 300mmX thickness 2mmX inner diameter 32mm. 

5) The linear guide cutting machine uses circulating coolant (cutting fluid) for cooling, which effectively prevents the black phenomenon of the section of the linear guide. 

6) Power supply: 3~AC380V. 

7) linear guide cutting machine with safety cover and safety stroke switch to protect the safety of the operator, the safety cover must be closed in place, in order to start the linear guide cutting machine for linear guide cutting. 

8) Linear guide cutting machine with feed and discharge roller line, making linear guide cutting more convenient. 

9) External dimensions: (L) 1045mmX (W) 750mmX (H) 1060mm.